|
|
Tim Yoder
Pen blank sorting system
|
|
Larry Elizondo
Banjo mounted, pivoting carving stand
|
|
Lyle Dragoo
Incremental blank measuring disks
|
Lyle Dragoo
Triple mounted buffing system, made by Larry Anderson
|
|
Ray Jones
Home-made hose clamps for gluing segmented turnings
|
|
Doug Hyde
Cutting and measuring system for segmented turnings
|
Doug Hyde
Table saw sled for bulk cutting of whistle
blanks
|
|
Bob Galloway
Unique 360 degree sliding table for deep hollowing
|
|
Bill Evans
Faceplate mounted sanding disk system
|
Larry Anderson
Tool for pulling shavings out of hollow vessels
|
|
Lee Casteel
Rotating Press for gluing segmented pieces.
|
|
Dan Combs
Jam chuck made from scrap wood and a door stopper bumper
|
Bob 'Mr. Fixture & Jig' Fulton
Chuck jaw size gauge
|
|
Bob 'Mr. Fixture & Jig' Fulton
On left: Remounting system to finish turn
the bottom of turnings. On right: Balancing system for out of balance blanks
|
|
Bob 'Mr. Fixture & Jig' Fulton
Very unusual and effective carving stand
made from wood and a bowling ball. The legs move to release the hold on the ball
and you can rotate the turning. Kick the leg back out and it holds the turning securely
|
Jim
Hartsell
Multiple uses for Velcro backed sanding pads
|
|
| |
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
